Horizontal Tippet Retainer

Push the plastic ring mounted at the base of the plastic snap hook down firmly.Grasp the two strands of the nylon cord in one hand the plastic snap hook in the other -- twist the snap free from the nylon cord inserted into it.Remove the plastic ring and decorative aluminum band from the cord.
Now remove the tool snap and cord stop from either side of the retainer. Load your tippet spools onto the retainer and reinstall the cord stop, snap, decorative ring, and plastic ring. Push the two strands of nylon back into the inside of the snap hook. Now push the plastic ring back up into place. The retainer is now ready for use.